User guide

Setting Up Fault Management Configuring Alarm Filters
947
AlliedView NMS Administration Guide
3. To create a criteria beyond the Source and Severity, select Advanced. The Match Criteria Properites sceen appears.
4. In this example we will setup a filter to eliminate an alarm that comes in with the message “Unable to login to this
device….”. Enter this using a wildcard in the Message field as shown in Figure 9-23, then select OK.
FIGURE 9-23 Setting Advanced Filter Criteria
5. Back on the Alert Filters screen, we need to associate it with some action to take. We create the filter action by clicking
on the add button (next to the Actions List). This brings up the Add action screen, as shown in Figure 9-24.