User guide

Setting Up Fault Management Configuring System Logs (NMS System Log Server)
937
AlliedView NMS Administration Guide
9.6.1 Configuring the System Log Server
The AlliedView NMS System Log Server is automatically configured to Enabled during installation. You can view the current
configuration and modify it to better meet your requirements, if necessary. To view the current configuration, select Tools -
> System Log Configuration for the Panel-Specific Menu. The System Log Server Configuration form, shown in the following
figure, will appear.
FIGURE 9-15 System Log Server Configuration Form - Initial State
Select the checkboxes as follows:
• Enable System Log Daemon - Enables or disables the Log Daemon, so that events can be logged.