User guide

Setting Up Performance Management Data Collection
901
AlliedView NMS Administration Guide
2. Under Polling Properties, change the Active and Update Managed Objects checkboxes, if desired.
Note: The information under Device Match Criteria is not editable.
3. Under Collection Statistics, select a Data Object from the list and change the field values as needed.
Note: Check the Advanced checkbox to enable all of the fields and checkboxes, if necessary.
Repeat for each Data Object you need to change.
4. When you are done, click Apply to make the change to the database.
8.3.2.3 Delete a Polling Object
Deleting a Polling Object means to delete all the statistics associated with the Data Identifiers.
To delete the Polling Object, select Edit -> Polling Objects, and then perform these steps:
1. Select the Polling Object on the left panel, and then select the Modify radio button just below the list.
2. Click the Remove button at the bottom of the form. A confirmation box asks to confirm the delete.
3. Click Yes and the Polling Object will be removed from the left pane.
You can view the results in the Configuration Collection panel, where the Statistics associated with the Polling Object are
deleted.
8.3.3 Add a Statistic
A Statistic may need to be added to a specific device. For such small changes, select Edit -> Add Statistic. The Modify Polled
Data form will appear, as shown in Figure 8-4.