User guide
Provisioning the iMG/RG Port-Based Rate Limiting - Reference
892
AlliedView NMS Administration Guide
ADSL B iMG624A-R2 iMG624A-R2 8/32 Meg Flash/RAM Third Generation
ADSL CPE - Greater
performance - able
to support 2 INP.
iMG634A/B-R2 iMG634A/B-R2 Marvell Switch
iMG634WA/WB-R2 iMG634WA/
WB-R2
Solos Processor
ADSL C
(no NMS
support)
iBG910A/B iBG910A/B 8/32 Meg Flash/RAM Multi-line ADSL
Gateway supporting
both ISDN and
POTS.
Marvell Switch
Argon Processor
TABLE 7-40 Port Rate Limits - Rules (Based on Functional Group)
Group Rule / Load Range
Fiber A Same as 3-5
Fiber B Broadcom based None | 128Kbps | 256Kbps | 512Kbps | 756Kbps | 1Mbps | 1.5Mbps | 2Mbps |
3Mbps | 4Mbps | 5Mbps | 6Mbps | 7Mbps | 8Mbps | 9Mbps | 10Mbps | 12Mbps |
14Mbps | 16Mbps | 18Mbps | 20Mbps | 25Mbps | 30Mbps | 35Mbps | 40Mbps |
45Mbps | 50Mbps | 60Mbps | 70Mbps | 80Mbps | 90Mbps
Fiber C Broadcom based 0 to 1792 Kbps in 64K increments, then 2000 to 12000 in 1Mbps increments
Fiber D Broadcom based Refer to Fiber B
Fiber E Marvell based None | 128Kbps | 256Kbps | 512Kbps | 1Mbps | 2Mbps | 4Mbps | 8Mbps
Modular Marvell based For iMG626MOD and iMG646MOD, refer to Fiber E
For iMG726MOD and iMG746MOD, refer to Fiber B
1
1. With Copper Gig Port, can go above 100Mbps.
ADSL A Kendin based 0 to 12000 in 32Kbps increments
ADSL B Marvell based Refer to Fiber E
ADSL C Marvell based Refer to Fiber E
TABLE 7-39 Functional Groupings of iMG/RG (Continued)
Group Model Load Name Characteristics Uniqueness