User guide

Provisioning the iMG/RG Port-Based Rate Limiting - Reference
891
AlliedView NMS Administration Guide
7.17 Port-Based Rate Limiting - Reference
Following are the rules and tables to use to select port-based rate limiting for the iMG/RG for that include release 3-7. The
settings that are possible depend on the type of iMG/RG and the software release that the device is using. The following table
lists the device types and loads supported. Refer to this table when reviewing the rate limits.
Note: A value of 0 disables the tx or rx ratelimiting function.
Note: Careful consideration must be given during the creation/planning of the iMG/RG General Profiles which establish the setting
for ratelimiting. Otherwise you may get an alarm indicating a device's settings are out of sync with the applied profile every
rediscovery period. This will most likely happen if you created a profile setup with rate limiting setting for a one iMG/RG type
(such as an iMG646) and you apply the profile to a different type that has different rate settings. This is why the
administrator is advised to create profile names that minimize confusion.
Note: If these values are not input, the rate rounds down to the next available rate.
TABLE 7-39 Functional Groupings of iMG/RG
Group Model Load Name Characteristics Uniqueness
Fiber A rg613TX, BD, LH, SH rg600E 4/16 Meg Flash/Ram Initial product
offering
rg623TX, BD, LH, SH Kendin Switch
Ni-210 Processor
Fiber B rg656BD, LH, SH RG6x6E 4/16 Meg Flash/Ram More efficient
routing when
VLANs
configured.Similar
service offering to
Modular Devices
iMG606BD, LH, SH Broadcom Switch
iMG646BD, LH, SH Ni-210 Processor
iMG646BD-ON/PX-ON
Fiber C iMG616BD, LH, SH iMG616E 4/16 Meg Flash/Ram Base Platform that
provides capability
for RF overlay.
iMG616RF, RF+, Broadcom Switch
iMG616SRF, SRF+ Ni-210 Processor
Fiber D iMG616W iMG616W 8/32 Meg Flash/RAM New indoor
wireless product -
greater processing
capacity - and
wireless support
iMG606BD-R2 iMG606BD-R2 Broadcom Switch
iMG616BD-R2 iMG616BD-R2 Solos Processor
Fiber E iBG915FX iBG915 8/32 Meg Flash/RAM New Multi port Tel
port offering. SFP
provides for WAN
flexibility.
Marvell Switch
He-520 Processor
Modular iMG626MOD iMG626 8/32 Meg Flash/RAM Modular outdoor
devices - provide
support for different
WAN services - and
additional LAN
interfaces.
iMG646MOD iMG646 Marvell Switch
iMG726MOD iMG726 He-520 Processor
iMG746MOD iMG746
iMG726BD-ON iMG726 (non-modular)
ADSL A iMG624A/B iMG624A/B 8/32 Meg Flash/RAM Second Generation
ADSL CPE.
iMG634A/B iMG634A/B Kendin Switch
iMG634WA/B iMG634A/B Argon Processor