User guide

Provisioning the iMG/RG System Power Management
883
AlliedView NMS Administration Guide
FIGURE 7-217 LAN Port Diagnostics Complete
For more information on these tests refer to the ATI Gateway Product Family Software Reference Manual.
7.15 System Power Management
This feature allows the user to modify power management for the device. When enabled at the device level, specified ports
immediately shut down, usually so that services such as lifeline POTS can continue as long as possible on battery backup.
When disabled, battery power traps are not sent from the device and port-based power management settings will have no
effect.
The table below shows iMG devices running 3.8 indicating which types support the ability to configure system power
management or whether the device can display port state for LAN and voice ports.
TABLE 7-38 iMG/RG Power Management Feature and Port State Support
Device Type
System
Power Mgmt
LAN Port
Power Mgmt
LAN Port
State
TEL Ports
Power Mgmt
TEL Ports
State
RG613-BD/LH Y
iMG613-RF Y
RG656-BD YYYYY
iMG606-BD/LH/SHYYYYY
iMG606-BD-R2 YYYYY
iMG646-BD/LH/SHYYYYY
iMG646-BD-ON/PX-ONYYYYY
iMG616-BD/LH/SH Y