User guide

Provisioning the iMG/RG iMG/RG Diagnostic Features
880
AlliedView NMS Administration Guide
FIGURE 7-212 Warning when Diagnosing VOIP Lines
The results of tests are displayed in the details panels, as shown in the following figure.
FIGURE 7-213 GR909 Test Results
7.14.2 iMG LAN Diagnostics
In the MOD iMGs and the iMG726-BD-ON, the LAN diagnostic feature was added in release 3.7.4. In NMS release 12.0, the
NMS supports this LAN diagnostic functionality. With the NMS, the user can diagnose CPE LAN ports. This diagnosis will
detect faults in the subscriber's private network cables. The change to the GUI is a new panel that allows the user to select
any or all CPE switch ports, diagnose them, and see the results
The LAN Diagnostics Panel is added to the Triple-Play Service Management Form for the iMG. The LAN Diagnostics belongs
to the iMG/RG Diagnostics sub-tab, but it is only displayed if the iMG/RG is an iMG6x6MOD or iMG7x6MOD CPE. Refer to
the following figure.
Note: This tab is only available for the MOD-type iMG.