User guide

Provisioning the iMG/RG Provisioning an iMG/RG with the LAN4 Feature
875
AlliedView NMS Administration Guide
FIGURE 7-204 iMG Provisioned using LAN4
9. The tabs for the Details screen are the same as an ADSL uplink, with the one difference the Port Assignments tab has no
port 4, as shown in Figure 7-196.
7.12.6 Deprovision the iMG and Re-provision with the ADSL Uplink
In this procedure, the iMG that currently uses LAN4 for the uplink is de-provisioned and then re-provisioned using the ADSL
port as the uplink.
7.12.6.1 Deprovision the iMG with the LAN4 Uplink
1. Right click on the iMG and select De-provision Customer iMG/RG. Select all of the options, as shown in the following
figure.
FIGURE 7-205 Deprovision iMG - Reset to Factory Defaults