User guide

Provisioning the iMG/RG Installation Procedures
838
AlliedView NMS Administration Guide
FIGURE 7-161 Delete RG-Port Association (Delete Object and Traces)
7. The user can now either:
• Place the iMG/RG back in its box for storage. When the RG is reconnected, it must be to a port in the same Access
Island.
• Transfer the RG to another iMAP port in the same Access Island.
8. End of Procedure.
7.10.9.3 De provision the iMG/RG (Different Access Island)
1. Find the RG you wish to de-provision (usually using the Customer ID from the iMG/RG table.).
2. Select the iMG/RG and then Operations -> De-provision Customer iMG/RG. The De-provision Port form appears.
3. Select the Customer ID option for the iMG/RGs and Voice Lines only, then click on De-Provision.
4. The RG will reboot.
5. In the iMG/RG table, the Customer ID is deleted and all profile information is deleted. Refer to Figure 7-162.
FIGURE 7-162 iMG/RG Table after Deleting RG
6. Access the device using telnet. Right click on the iMG/RG in the iMG/RG table and select Telnet to Device. Refer to the
following figure.