User guide

Provisioning the iMG/RG Installation Procedures
835
AlliedView NMS Administration Guide
FIGURE 7-158 Customer Using Profile for Double Play (no Video)
8. Select Save iMG/RG Configuration.
9. Back on the Status tab, click on Update Customer Info.
10. Note the results: any video connected to the RG will no longer work.
11. END OF PROCEDURE
7.10.7 Change Quality of Existing Data Service
This will be supplied in a future release.
7.10.8 Reprovision Existing iMG/RG so incorporated into AlliedView NMS
In this scenario, the iMG/RG has already been provisioned either locally or using the ZTC components. If the user wishes to
take the existing iMG/RG and transfer control over to the NMS, the NMS will make a best effort and try to ensure that all of
the features on the iMG/RG can be controlled by the NMS.
When transferring control over, the user should be aware of the following NMS features:
• The NMS shows only one service per LAN port.
• The NMS can’t tell the difference between bridged internet service and video without snooping, unless the service is
named “InternetIP” or “VideoIP”.
• The NMS can’t tell the difference between bridged internet service and TLS, unless the service is named “InternetIP” or
“TLSIP”.
• The NMS supports a single Internet service.