User guide

Provisioning the iMG/RG Installation Procedures
829
AlliedView NMS Administration Guide
11. Note the results - The Video Service Profile changes form None to Video-Proxy with the Video Svc. VLAN from the RG
GeneralMgmt profile
Note: Do not make changes to the IGMP values, or the video service will be out of synch with the video profile. (If you do so, and *
will appear next to the Profile Name.)
12. Return to the Mgmt. Info sub-tab.
13. Click on Save iMG/RG Configuration.
14. Back on the Status tab, click on Update Customer Info.
15. Note the results. Video should no longer be available.
16. End of Procedure.
Note: For the Open Access Model, the same procedure would be used, with the administrator ensuring that there was no conflict in
VLAN configuration between the iMG/RG General Profile and the Video Service Profile.
7.10.6.3 Add Second Video Line
1. Ensure the prerequisites are met:
• An RG General Profile exists that supports more than one video, i.e. DeskLab-3-play-2Video.
2. Find the iMG/RG for the customer in the iMG/RGs table using various methods:
• Bring up the iMG/RGs node in the Network Inventory table and do a search (Ctrl-F) on the Customer ID.
• Bring up the Ports node in the Network Inventory table and do a search (Ctrl-F) on the Customer ID.
3. Right click on the iMG/RG or Port and select View/Modify Details. This brings up the Triple Play Service Management
screen.
4. Select the iMG/RG tab, which automatically shows the Mgmt. Info tab.
5. In the RG General profile pull-down, select the Profile DeskLab-3Play-2Video, as shown in Figure 7-153.