User guide

Provisioning the iMG/RG Installation Procedures
820
AlliedView NMS Administration Guide
FIGURE 7-143 Applying Voice Profile
10. Click on Modify.
11. Select the Status tab (there are no sub-tabs).
12. Click on Add Voice Line. The Add Voice Line form appears.
13. In the Add Voice Line form, note that the Voice Endpoint (used for DNS) is already defined, as well as the interface
group. These were defined in the Voice service profile.
14. Select from the pull-down the Voice Endpoint Port, the Line Profile, and the CRV. Refer to Figure 7-144.