User guide

Provisioning the iMG/RG Installation Procedures
816
AlliedView NMS Administration Guide
• To provision now, click on Provision. The Task Details screen appears and shows progress states. If there is a failure,
double-click on the relevant sub-task for details.
• To provision, select Hold and then Provision.
• To provision at set time, click on Schedule, enter the date/time, and then Provision
Note: At this point, the user can provision other ports, since the iMG/RG has not been connected to the iMAP; all that is being
provisioned is the iMAP port.
13. Review the Triple Play Service Management Form, as shown in Figure 7-140.
FIGURE 7-140 Service Management Form - iMAP Port Configured, no iMG/RG Configured
Note the following:
• The Video/Data Port Configuration Panel includes the upstream port and card/port status
• The Voice Configuration Panel includes the Voice Endpoint (needed for DNS lookup for DHCP) and the Voice Endpoint
Port (TEL1, which is the port the customer will plug the phone into).
• The Alerts Panel has any alarms. There should be no alarms.
14. Review the iMG/RG table, as shown in Figure 7-141.