User guide

Provisioning the iMG/RG Installation Procedures
813
AlliedView NMS Administration Guide
FIGURE 7-138 Provision Triple Play - No Services
7.10.3.4 Add Services to an Already Provisioned Port
When services must be added to the pre-provisioned port, the same steps are used when adding services to a port that
already has some service(s) configured, using the View/Modify Customer window. Following is a summary of these steps. For
details, refer to the procedures in the rest of this Subsection.
1. Select the appropriate new general profile that reflects the services desired and then Modify.
2. Select the appropriate internet profile then Modify. (if services required)
3. Select the appropriate video profile and Modify. (if services required)
4. Select the appropriate voice profile and Modify.
5. From the view/modify status tab Add a derived voice line
6. Select Save the Config and Restart.
7.10.4 Provision a new Customer (out of the box) - Triple Play
7.10.4.1 When to use this Procedure
• The iMAP port that interfaces the iMG/RG has not been created.
• Customer has purchased video, data, and derived voice service.
• The customer/installer will remove an iMG/RG from its packaging and so all settings are at factory defaults.