User guide

Provisioning the iMG/RG Provisioning Guidelines for Models
806
AlliedView NMS Administration Guide
FIGURE 7-133 Panel to Add/Remove/Modify Custom VLANs (Once Profile is Created)
This panel includes the name and indication if the VLAN is tagged on WAN port. The table format used works similar to
others in NMS where the top table shows current values and the bottom table is for editing. Since iMGs cannot have more
than 14 VLANs, this will limit the number of VLANs in device to 14 (including Default and all service VLANs).
Also to support the custom VLANs, the Advanced parameters panel on the iMG/RG Service Management Panel (iMG/RG-
>Port Assignments) for LAN ports includes fields that allow the user to specify untagged VLAN ID or tagged VLAN IDs on
the selected port. These VLANs specified must be those that were created as additional VLANs (not service VLANs) and are
only allowed if the LAN port is not associated to any other service (set to None). This is done to protect existing services
from being affected by configuration or traffic that may be sent through additional VLANs. Refer to the following figure.