User guide

Provisioning the iMG/RG Provisioning Guidelines for Models
803
AlliedView NMS Administration Guide
FIGURE 7-130 Service Management Form - Bridged Service
7.9.6.5 The Subscriber Using the Feature
Once the feature is activated, the subscriber can connect to the iMG over the web interface using the default id / password
of admin / admin. Although the subscriber at this point can change wireless parameters, it is recommended that the
subscriber first change the password for security.
Note: While the feature is activated, the NMS administrator cannot modify the wireless parameters. However, any parameters
changed by the subscriber are written to the NMS database; any backups made by the NMS will therefore include the
changed wireless parameters. This affects certain recovery scenarios as explained below.
The subscriber as admin with default privileges can do the following on the device:
• Change wireless configuration parameters
• Admin > Change Password
• Admin > Save Configuration
• Security > MAC Filtering
• Admin > Reboot
With the feature up and running, the subscriber may be helped in the following scenarios
• Subscriber has forgotten the password and requests to have the password reset to the default (‘admin’)
The NMS administrator can reset the subscriber password by using the Service Management form. On the Mgmt. Info
tab, the New Subscriber User Password is set to admin, which is the only option.
It is not necessary to disable the feature to reset the password.