User guide

Provisioning the iMG/RG Provisioning the iMG/RG (Application Manager)
779
AlliedView NMS Administration Guide
The way to access the Application Manager is unchanged
• Right-click on a device (as an icon or table row), and select Provision -> (Provisioning Task).
• From the main menu, select Tools -> Application Manager.
The following figure shows the result when the user selects Tools -> Application Manager.
FIGURE 7-105 Application Manager GUI for CPE (iMG/RG)
Note that the user can select the CPE button and only the tasks available are highlighted; the others are grayed out. (The
others would be available if the user had chosen NETWORK.)
The options available are similar to those for network devices. The user can double-click on one of the Applications in the
table (or select the application, and then click GO) and it will invoke the specific application window.
If the user clicks Add/Remove Devices, which is at the bottom of every application window, the set of (CPE) devices that are
to be included in the application can be controlled, as shown in the following figure. Refer to 5.3.1 for details on using the
buttons and options.