User guide

Provisioning the iMG/RG Provisioning the iMG/RG (Managed Object Properties)
776
AlliedView NMS Administration Guide
7.7.3.4 Provisioned / Available Ports in an Access Island
In the Ports node, it is useful to create a Custom View for provisioned and unprovisioned ports, since the administrator
could then quickly see the pool of unprovisioned ports that could be used for adding subscribers.
For provisioned ports, the filtering criteria is as follows: (names are for an example customer):
• customerID = ! (logical not, since a provisioned port must have a customer ID)
• type = CustPort
• parentKey = dot18*
For available ports, the filtering criteria is as follows:
• ethIfIndex = <> (null, since an available port does not have an Ethernet index value)
• customerID = <> (null, since an available port does not have a customer ID)
• type = CustPort
• parentKey = dot18* (This narrows the view down to the Access Island.)
An example would be a Custom View that showed all GE ports on Access Island 01. The criteria would be:
• name = DVLKND-AI01*
• SubType = *Gigabit*
Note: Sorting or ordering of these views is not supported, so the creation order is important.
1. create a view of all unprovisioned ports
2. Create two views (unprovisioned/provisioned) per Access Island.
7.7.3.5 iMG/RGs Grouped by Type
Custom Views should also be created for the iMG/RG type, allowing the administrator to isolate an iMG/RG and the services
it can provide, as well as which RGs have not been provisioned yet. Example criteria is as follows:
• ADSL - className=RgMO, type=iMG6*4*
• Ethernet - className=RgMO, type=!iMG6*4*
• MOD - className=RgMO, type=*MOD*
• Unprovisioned - className=RgMO, rgCustomerID=<> (null, since a provisioned RG must have a Customer ID)
• Voice - className=RgMO, voipProfileName=!
7.7.3.6 Fault Management
Custom Views should also be created for fault conditions or output The filtering criteria is as follows:
• Syslog CLI Events - Category = SYSLOG-CLI*
Note: An alarm category of Battery is available, so these battery-related alarms can easily be viewed in the Alarm Summary View in
the main AlliedView NMS screen.
• G6 events in last time period (i.e. 24 hours) - refer to the following figure