User guide

Provisioning the iMG/RG Provisioning the iMG/RG (Managed Object Properties)
773
AlliedView NMS Administration Guide
7.7.3.1 All iMG/RGs in an Access Island (in IP Network Map)
As shown in Figure 7-99, there is a Custom Map View for all iMG./RGs for Access Island 1 that shows all iMG/RGs that are
part of this Access Island. To create this Custom View, perform the following steps:
1. Select the Network Node that will have the Custom View as a sub-node (this can also be done later).
2. Right click on this Node and select Custom Views -> Add Custom Map (or Control-N)
3. On the Map Properties form, fill in the Name you wish to give this Custom Map. (You can also choose the parent node
here if you wish to change this.)
4. Click on the More button and the Select Additional Criteria to include more attributes that will filter this form. The
following figure shows which attributes are used, ClassName (RgMO), and UpstreamDevicePort, with a criteria that
selects all the subtending nodes in the Access Island.
Note: You must create or “manage” all rgmgmt IP subnets beforehand; The NMS learns of RG's via “DHCP” or “Discover Attached
iMG/RG” otherwise they will not show up in the any IP subnet MAP.
FIGURE 7-100 Custom Map for iMG/RGs in an Access Island