User guide

Provisioning the iMG/RG Provisioning the iMG/RG (Managed Object Properties)
769
AlliedView NMS Administration Guide
TABLE 7-29 Managed Object Properties for Nodes
MO Form Property Description for Nodes
Custom Map
View Property Example
Name The device name, which is a unique name that
is used as the key in the database. This name
cannot be changed.
name 172.16.33.11 or
DVLKND-AI01* (sets
scope for Access Island
01)
Type The type of the object, such as whether it is a
network, node, or an interface object, or
something user specified, like router, switch,
etc.
type 9700
9400
Rapier*
(all Rapier devices)
RG*
(all RG devices)
Managed A checkbox that indicates whether the
managed object is managed by the NMS.
When checked, the object is being managed by
the NMS. Otherwise, it is not.
managed true
(would not include
devices that were
discovered and
unmanaged)
IpAddress The unique address assigned to each and every
object.
ipAddress 172.16.33.11
Netmask The netmask that is specified for this managed
object. Network masking is a methodology by
which the elements in a network can be
meaningfully categorized.
netmask 255.255.255.0
ParentNet The ID of the network that contains this node
or a list of network numbers if this is a router
connecting two or more networks.
parentNet 172.16.33.0
InterfaceList A non modifiable drop-down list of all
interfaces on this device.
InterfaceList 172.16.33.20
172.16.33.21
(The value all would
select all nodes.)
Tester The type of testing to run when checking the
status of the device.
Refer to the AlliedView NMS Admin Guide,
section 9.8.
Community The community string of the corresponding
SNMP agent associated with the link
community
SysName
(Internal)
The system name as reported by the SNMP
agent
SysDescr The value of the system description associated
with the type of managed object to be filtered.
sysDesc Telesis 9700
all
SysOID The system object identifier of the device as
reported by the SNMP agent of the device.
sysOID .1.3.6.1.4.1.207.1.15.3
Login The CLI username to use when NMS executes
CLI commands on the device. It is defaulted
but it should be changed.
login officer
Password The password to use when NMS logs in with
the CLI username.
klk3kdr3