User guide

Provisioning the iMG/RG Provisioning the iMG/RG (Managed Object Properties)
767
AlliedView NMS Administration Guide
FIGURE 7-97 Configure iMG with Static Video IP Address
7.7 Provisioning the iMG/RG (Managed Object Properties)
7.7.1 Overview
• Managed Object Properties for the iMG/RG
Section 8 of the AlliedView NMS User Guide describes all the relevant managed objects and their properties so that the
user can control how the MO is provisioned. This is especially helpful in understanding how MO properties can be
filtered in Custom Views.
• Custom Views
As explained in 7.2.2, an Access Island is a group of up to eight iMAPs (with one hub) that are used for a Service Location.
In most cases, being able to identify the components specific to an Access Island helps in provisioning current and future
subscribers as well as troubleshooting problems.
The example Custom Views in 7.7.3 should be created for each Access Island.
7.7.2 Managed Object Properties for the iMG/RG
As mentioned above, Section 9 lists the properties for the MOs. The following figure and table explain the properties for
iMG/RGs and is useful in both provisioning and the iMG/RG and creating Custom Views.
Note: For SysName, SysLocation, and SysContact, NMS checks for up to 255 characters, and outputs a specific error message if
more than 255 characters are input. If the device allows a maximum of less than 255 characters, NMS will still flag the
mistake but the error message is a more generic “webserver: Value too long”.