User guide

Provisioning the iMG/RG Datafilling the Triple Play Form - Examples
764
AlliedView NMS Administration Guide
2. In the IGMP Mode drop-down list, select Proxy. This must be set first in order to set the Use DHCP to obtain WAN IP
Address field.
3. In the Use DHCP to obtain WAN IP Address drop-down list, select True.
4. If you are configuring an iMG 600, iMG 700, or iBG 910 series device, in the Multicast Acceleration drop-down list, select
Enabled. This will configure the upstream VLAN so that multicast traffic can travel across the local VLAN and the
upstream video VLAN.
FIGURE 7-94 iMG/RG Video Profile for Mediaroom
5. If you are creating a new profile, ensure the entire profile is complete and click Create. If you are modifying an existing
profile, click Modify.
After configuring the profiles, you provision the iMG device using the Triple Play form. Profiles are included as with other
configurations.
7.6.10.4 Mediaroom Device Support
For iMG 600, iMG 700, and iBG 910 series devices, Mediaroom features are available only for those that support iMG 3-8
and above. If Mediaroom profiles are used on devices that do not support the functionality the configuration is not applied
and the LAN ports are configured for routed Internet service.
The following iMG 600 series devices do not support Mediaroom functionality:
• RG613-TX/TXJ/BD/SH/LH
• RG623-TX/BD/SH/LH
• iMG613-RF
• iMG616-BD/SH/LH/RF/RF+/SRF+