User guide

Provisioning the iMG/RG Datafilling the Triple Play Form - Examples
756
AlliedView NMS Administration Guide
FIGURE 7-85 Provisioning Ports on AlliedWare Plus Devices
Note: After the ports have been provisioned with the NMS, then de-provisioned, their customer ids remain blank. Over time all non-
provisioned ports will be blank. It's only when the device is newly installed that they have default descriptions and require this
extra de-provisioning step.
• Upstream port numbering - These use the 3-number format (for stack.module.port)
• Each AlliedWare Plus device must function as an L3 Router.
• Customers on each switch must be in non-shared subnets, because these AlliedWare Plus devices do standard DHCP
Relay with option 82 as circuit ID only (no remote ID) and do not perform DHCP Snooping.