User guide

Provisioning the iMG/RG Datafilling the Triple Play Form - Examples
755
AlliedView NMS Administration Guide
FIGURE 7-84 iMG/RG Connected to x908 Upstream Device.
The Triple-Play form can be used to pre-provision the iMG/RG using the already created Profiles. The Triple-Play form is
filled out as with other upstream devices, as shown Figure 7-86.
The few points to note in configuring iMG/RGs to AlliedWare Plus devices are:
• In 12.1, when an AW+ product is first installed, you must use NMS to deprovision the ports before provisioning the
ports. This is because they have default descriptions (CustomerID) such as port1.2.4, as shown in the following figure.
= voice_VLAN (VID 10)
= video_VLAN (VID 40)= data_VLAN (VID 20)
Video
Head
IP
Gateway
Class 5
Switch
ISP
Customer
XE/GE card GE (Etherlike)
10
= Physical Link
Video to
Set Top Box
Data to PC
FXS FXS
40
SFP SFP
BD Fiber
20
Ethernet
Ethernet
40
20
10
SBx908