User guide

Provisioning the iMG/RG Datafilling the Triple Play Form - Examples
736
AlliedView NMS Administration Guide
FIGURE 7-64 Triple Play Form for Static Provisioning
After clicking on Provision, the AlliedView NMS stores all of the values.
If the RG has previously been discovered, the values in the Triple-Play form are applied. If the RG has not been discovered,
discovery can be done in two ways:
• Wait for the 24-hour discovery cycle to discover the RG. The AlliedView NMS will perform an SNMP ping and eventually
ping using the address given to the RG (assuming the AlliedView NMS has discovery set up for the subnet that the
manually given IP address belongs to).
Note: The default Discovery period is 24 hours, assuming there are few enough devices so that in 24 hours all devices can be
discovered. If there are a large number of devices, the period will extend beyond 24 hours.
• Manually add the RG using Add Node, as explained next.
7.6.4.4 Add the RG to the Network
Selecting Edit -> Add Node brings up the Add Node window, as shown in the following figure.