User guide

Provisioning the iMG/RG Datafilling the Triple Play Form - Examples
725
AlliedView NMS Administration Guide
FIGURE 7-53 Result of changing VLAN/VC for Internet Service
Note: If all four VCs are being used and the user wishes to change a VPI/VCI attributes for one of the existing VCs, this cannot be
done; the user must delete one of the VCs and then add the new VPI/VCI combination to a new VC.
7.6 Datafilling the Triple Play Form - Examples
7.6.1 Overview
Before you fill out the Triple-Play form make sure you perform the following:
• Create the relevant RG and iMG profiles.
• Create the relevant iMAP port profiles.
• If voice service is being provided, configure the initial voice handling (such as G6).
Refer to 5.6.2 for an overview of the Triple Play form and its fields. Once the profiles have been defined, they are included in
datafilling the triple play form. The form includes a pull-down where the administrator chooses which RG General profile will
be applied to the RG that interfaces the iMAP port. The fields that appear depend on the RG General Profile chosen and the
services that are going to be configured on the RG.
The Provision New Triple Play Customer Form is used to provision on one form most of the attributes needed for one
Triple Play customer. The fields of the Provision New Triple Play Customer Form are described in 5.6.2.