User guide

Provisioning the iMG/RG Basic Configurations with Sample Profiles
721
AlliedView NMS Administration Guide
FIGURE 7-49 The RG General and ADSL Port Profile to Support VLAN/VC Configuration
When the user then fills out the Triple-Play form for the ADSL-based iMG/RG, and uses these profiles, the VLAN/VC
settings will be set immediately on the iMAP, and on the iMG/RG when it placed into service (connected and powered on).
The following figure shows a Triple-Play form that uses the profiles that will have the iMG/RG come up with the internet
VLAN having a different VC and transmit rate, as shown in Figure 7-49.
Note: The attributes on the iMG/RG General Profile, Port Profile, and Service Profile must match. Otherwise, when the user fills out
and submits the Triple Play form, it will fail with the error message that the profiles don’t match. (If these profiles were to be
applied, traffic would not pass on the internet VLAN.) This is shown next.