User guide

Provisioning the iMG/RG Creating RG Profiles with Field Descriptions
701
AlliedView NMS Administration Guide
7.4.6 Business Group ID for SIP
The concept the Business Group ID for SIP is specific to Lucent and Sonus. To configure this ID, access the iMG/RG -> Voice
Service Tab. If the user chooses the Voip Type as SIP, and then under Advanced VOIP Attributes chooses the iMG/RG
Admin. Profile as Lucent or Sonus and clicks on Done, the New Line Configuration table will now include the Bus. Group ID.
Refer to the following figure.
FIGURE 7-28 Setting the Business Group ID for SIP (Lucent of SONUS)
Note: If there is a SIP Voice Profile for SIP, with type Lucent of Sonus, the user could also choose a Voice Service Profile that matched
(such as Profile SIP_SONUS), and the Bus. Group ID field would appear after selecting another tab and then re-selecting
Voice Service to refresh the page.