User guide

Provisioning the iMG/RG Creating RG Profiles with Field Descriptions
686
AlliedView NMS Administration Guide
FIGURE 7-19 RG Internet Profile - Triggers
TABLE 7-11 Create RG Internet Profile Security Tab
Attribute Value
Security Whether the feature is Enabled or Disabled. This option is activated only for
Routed Service. Moreover, it controls whether the Enable/Disable fields for Firewall
and NAT are activated.
Note: Security does not have to be enabled to enter Triggers and Mgmt.
Stations, although this would not usually be done.
Include Security Info as part of
Profile
Whether Triggers or Mgmt. Stations are included in the profile.
Rapid Route Used to configure the iMG for Media Room support. This enhances NAT routing
functionality in CPE for better throughput of routed traffic. Refer to 7.6.10.2
Triggers A set of attributes that allows an application to open a secondary port to transport
packets. A trigger opens a secondary port dynamically, and allows you to define the
length of time the port can be inactive before it is closed.
- Trigger Name - a label that helps identify the trigger. It cannot start with a digit.
- Type - protocol for the application, tcp or udp
- Start Port - First port in the range for the control session.
- End Port - Last port in the range for the control session.
- Max. Act. Interval - the amount of time (in milliseconds) the secondary port is
allowed to pass traffic before it is closed. The default is 3000 (3 seconds).