User guide

Provisioning the iMG/RG Creating RG Profiles with Field Descriptions
680
AlliedView NMS Administration Guide
FIGURE 7-17 RG General Profile - IP Routes Tab
Advanced Port params Brings up specific features:
- Disable on Power Failure feature for the port. Refer to 7.15.2.
- Flow Control - Refer to 7.16
- DSCP Status - Enables the support of DSCP IP field on the incoming frames. Refer to
the Allied Telesis Gateway Software Reference Manual, command SWITCH SET
SUPPORT DSCP.
- Additional Untagged VLAN IDs - Refer to 7.9.8.
- Additional Tagged VLAN IDs - Refer to 7.9.8.
Copy value from Profile To create a new profile, the user can select an existing profile, which will fill in the
values from that existing profile. The user can then modify any fields.
Create Activated when a Profile Name has been typed, it creates the profile with the entered
values.
Cancel Closes the window
TABLE 7-8 Create RG General Port Profile Form - Port Assignment Tab
Attribute Value