User guide

Provisioning the iMG/RG Viewing iMG/RG on the AlliedView NMS
671
AlliedView NMS Administration Guide
To change the customerID, the administrator must change the customerID for all three types; this is done by changing the
CustomerID for all three areas on the Triple-Play Service Management form.
Refer to 6.15.4 and 7.10.10.
7.3 Viewing iMG/RG on the AlliedView NMS
Once the iMG/RGs have been provisioned, they can be viewed in various ways that allow the administrator to track their
configuration and their status.
Figure 7-11 shows the physical node, with the iMAPs grouped according to their Access Island. Note the following:
• The IDs of the iMAPs follow the naming convention explained in 7.2.6.
• The iMAPs are grouped to show their physical configuration (hub node, ring, links)
FIGURE 7-11 Physical View - Access Islands
Figure 7-12 shows the RG Inventory List sorted by Upstream port, so the user can easily find specific RG. The table can be
sorted by different columns, and the user can create a Custom View to show only specific RGs. (Refer to 7.7.3.)