User guide

Configuring Network Services Port Authentication (802.1x)
647
AlliedView NMS Administration Guide
FIGURE 6-259 Service Management Form - Port Authentication Active
Note: Once Port Authentication is enabled (by setting to Enabled at both device and port), you cannot add or delete a VLAN on that
port. The following type of error is seen in the console window when modifying a VLAN on a port (via view/modify the port or
deploy/apply the port profile):
delete VLAN=40 interface=1.2
Processing.....
Error (040626) Port Authentication has been enabled on ETH: [1.2]
officer SEC>>
To add or delete a VLAN, you must disable Port Authorization (either disable the feature on the port or deprovision the
port).
Note: For the SBx3112; you cannot have both 802.1x and MAC Authentication enabled on the same port. Refer to the Software
Reference Manual for the SBx3112 for more information.