User guide

Configuring Network Services Port Authentication (802.1x)
641
AlliedView NMS Administration Guide
FIGURE 6-254 Port Authentication Configuration - AlliedWare Plus Device
6.22.2 Profiles with the Port Authentication Feature
To configure Port Authentication for a port, the Profiles can be used so that the feature is automatically enabled when the
port is brought into service. The following Profiles include Port Authentication.
Note: Although the feature can be changed on the Service Management window for the port, it is recommended to use Profiles and
the Triple-Play form to configure the feature, since this will lead to fewer errors when configuring a large number of ports.
6.22.2.1 iMAP (SBx3112) and AlliedWare Plus Device Profiles
The following figure shows the menu to bring up a Profile for an iMAP (in this case, the SBx3100) and AlliedWare Plus
devices.