User guide

Configuring Network Services Port Authentication (802.1x)
640
AlliedView NMS Administration Guide
The Port_Auth_Mgmt screen appears, with device information and a set of tabs, one for Port Authentication and one for
Radius. Refer to the following figures. Note that for AlliedWare Plus devices, this is a new window in release 12.3.
FIGURE 6-253 Port Authentication Configuration - SBx3112 Device
The Auth Settings tab has the following subtabs:
• Ports - The status of Port Authentication (Enabled or Disabled), Port Control, Host Mode, and Guest Vlan.
• Supplicants - The attributes of supplicants that have successfully connected.
• Statistics - For each port the MAC address and counts of 802.1X protocol frames.
• Session Stats - For each port the MAC address and attributes for a completed session.
• Diagnostic Stats
The Radius Tab allows the user to view the RADIUS attributes that have been configured.
For the AlliedwarePlus devices the Port Authentication Management window, there are some differences in the display
regarding what data for each port is displayed. Refer to the following figure.