User guide

Configuring Network Services Upstream Control Protocol (UCP) Display
622
AlliedView NMS Administration Guide
FIGURE 6-233 UCP Status in the Network Inventory Table for the VLAN Interfaces (Highlighted)
6.18.3 Events View (Change of State)
When the active/standby status of the Primary/Secondary Node changes (because of failures in the network or administrative
changes), SNMP traps are sent from the device indicating a state change. In the Events view, they appear as Info status events.
The following figures show how these changes are displayed.
FIGURE 6-234 Events View when Change in UCP State (Highlighted)
Note: Since Events are part of Alarm Management, these events can be modified going through the Events Filter and can trigger
various other events/alarms. Refer to Section 9.
These changes are also reflected in the VLANIF submap and the VLAN Interfaces Network Inventory table.