User guide

Configuring Network Services Circuit Emulation Service
592
AlliedView NMS Administration Guide
FIGURE 6-202 Triple Play Form - Selecting General Profile brings up CES Service Config
Selection of the CES Service Profile permits entry of the following parameters.
• CES Service Profile (an RG CES Service Profile - for required module and port attributes)
• Local CES IP and mask (for the CES module being provisioned - Module specific)
• CES Port 1: will need LocalUDP, PeerIP, and PeerUDP (customer specific)
• CES Port 2: will need LocalUDP, PeerIP, and PeerUDP (customer specific)
The Provision Button becomes active after specifying the required parameters and the CustomerID (at the top).
The provision tasks are run when the Provision Button is pressed. Refer to the following figure.When finished, the user has
the option of Provisioning a new subscriber.