User guide

Configuring Network Services Circuit Emulation Service
587
AlliedView NMS Administration Guide
6.16.7.1 Create RG_CES_DS1 Profiles
This has similar attributes to the iMAP CES DS1 profile, except that this will be for a DS1 port on the iMG6x6MOD. Select
Network Services -> Profile -> iMG/RG Service Profiles -> Create iMG/RG CES-DS1 Port Profile. Refer to the following figures which
show two profiles; each profile could be applied to a different DS1 port on the CES card on the iMG6x6MOD. Key attributes
are:
• A Timing Reference parameter is included with values { Self | Connection | Internal } on the DS1/E1 Tab. It's value should
be compatible with the Peer end. (Note that there is no CARD value for the RG..)
• Line Encoding
FIGURE 6-196 Creating a RG-CES-DS1 Profile - DS1 (0dB)