User guide

Configuring Network Services Circuit Emulation Service
581
AlliedView NMS Administration Guide
6.16.6.2 PSPAN Tab
The following figure shows the PSPAN tab for the two endpoints.
As with the DS1 tab, the row selected is the port that appears on the left.
The main attributes of the PSPANs are at the top of the form and are read only.
The editable attributes are at the bottom of the form. Note, however, that the Peer IP Address and Peer UDP Port are read
only since this is a two-port configuration. (In a one-port configuration, these fields are editable.)
Changing the RTP for one PSPAN changes it for both PSPANs to keep them compatible.
FIGURE 6-190 Viewing Dual CES points - PSPAN Tab