User guide

Configuring Network Services Circuit Emulation Service
579
AlliedView NMS Administration Guide
6.16.6 View Provisioning Results
To see the results of the dual endpoint provisioning, go to the Port Management window for the device and sort on
Customer ID. Refer to the following figure.
FIGURE 6-188 Viewing Dual Endpoints - Same Customer ID
This shows that ports 12.4 and 16.5 are the endpoints. By double-clicking on either of these rows, the DS1 Port Management
tabbed form appears, and one can view/modify the details of the configuration.
Note: In this tabbed form, it is possible to change the attributes of the endpoints, and even to split the dual endpoints into two single
endpoints, if that is desired. However, in most cases the user should plan the dual endpoints so that configuration is easy and
less prone to error.