User guide

Configuring Network Services Circuit Emulation Service
576
AlliedView NMS Administration Guide
Note: At this point, the card attribute Ports Type for the General Tab can be changed, but the card would need to be disabled, and
there is a warning about the need to disable the card. The Profile can also be changed, and there is a warning that such a
change will destroy existing provisioning data.
6.16.4 Create DS1 Profile (DS1 and P-SPAN)
When a DS1 port is provisioned, a DS1 profile must already exist so it can be associated with the DS1 port. An overview of
Profiles is in 6.10. In this example a profile called ds1_profile is created. The following figures show creating the profile.
(Once created, they can be viewed in the Profile table by double-clicking on the profile row.)
FIGURE 6-184 Creating a DS1 Profile (DS1 tab)