User guide

Configuring Network Services SuperLoop Prevention (Superring)
552
AlliedView NMS Administration Guide
6.14.2.2 Create Second EPS Ring that is a Peer of First EPS Ring
The steps to create the second, peer EPS Ring are similar to the first. In choosing a looped Network VLAN where there is a
shared link with another EPS Ring, the user must put in a non-zero value for the EPSR Priority, and this value must be
different than the first ring.
Select the Network VLAN and click on Create Protection Domain. As with the first EPS Ring, the Control VLAN is
configured on all of the interfaces and the resulting GUI shows the EPS Ring and which node is Master, as shown in the
following figures.
FIGURE 6-151 Configure Peer EPS Ring (to form SuperRing Configuration)