User guide

Configuring Network Services Protection Switching-EPSR
534
AlliedView NMS Administration Guide
6.13.5.4 Create a Data Ring
A preferred way to create a Data Ring is to clone the just created Control Ring. In the Network VLAN Manager, select the
Control Ring Network VLAN (Ctrl301) and right click on Create/Protect EPS Data RIng, as shown in Figure 6-126.
FIGURE 6-126 Creating a Data Ring from an Existing Control Ring
The Create New Data Protection Ring Dialog appears, as shown in Figure 6-127.
FIGURE 6-127 Creating the Protection Ring Network VLAN (from the Control Ring)
Input the VID (always a number) and Vlan Name and click on OK. The configuration that results from this is shown in Figure
6-128.