User guide

Configuring Network Services Protection Switching-EPSR
527
AlliedView NMS Administration Guide
FIGURE 6-115 Creating an EPSR Data Ring by Cloning Control Ring
The user fills in the VID and the Vlan Name. The user clicks on OK, and this brings up the Protection Ring Configuration
Panel with all columns filled in, as shown in Figure 6-116.
If more than one control ring could be applied to the data network VLAN, these will appear in the Possible EPS Ring
Protections list. The user should select the one that will be used.
FIGURE 6-116 Protection Data Ring Configuration Panel