User guide

File Administration Discovery Configurator (Service Provider)
37
AlliedView NMS Administration Guide
3.1.6 Node Discovery Tab
FIGURE 3-8 Discovery Configurator – Node Discovery Tab.
This tab specifies specific nodes to discover (or exclude from discovery).
Nodes can be added, modified, or deleted with the Add, Modify, and Delete buttons.
The “Discover Node” toggle, when checked, means to discover the node. When unchecked, that node will be ignored
(excluded) from discovery.
The “Discover Parent Network” tab means to discover all the devices in the parent network, as well. The parent network
will be considered to be all IP addresses in the same subnet as the node as defined by its IP Address and its Net Mask. When
unchecked, only the one node will be discovered.
The SNMP version used can be selected here as well, with the properties determined by the version, as shown in the
following figure.