User guide

Configuring Network Services Quality of Service (QoS) Network Management
511
AlliedView NMS Administration Guide
2. With the Traffic Actions created, the QosPolicy (with its set of Rules) can be created.
• Select Network Services -> QoS -> Policy - This brings up the QoS Policy Maintenance Form.
Note: You can also go to the Network Service data node and select QoS policies -> Actions, and select an existing Policy
• Select the New Policy button, and enter the New Policy Name, following the Policy naming conventions. Do not select
the Copy from ... tic box.
• At the Edit QoS Device Class List, click on Telesyn and then the Select button
• The QOS Traffic Policy form appears with its list of attributes. Since this is a new policy, only the two default rules
appear. If they are highlighted, select Remove (under Ip Filter Rules), and the result is a policy with no rules. (If they are
not highlighted, select a rule and select Delete Rule.) Refer to the following figure.
FIGURE 6-101 Creating a Policy with no Rules