User guide

Configuring Network Services Quality of Service (QoS) Network Management
510
AlliedView NMS Administration Guide
• The QOS Traffic Action form appears with its list of attributes. For the FX20 queue, only four are used, so select these
and edit the values.
Note: Although not necessary, you should delete the other attributes so that only the key attributes are highlighted. Refer to the
following figure.
• Click on Save Traffic Action, and click OK on the confirmation window.
• Click on New Action, enter another Traffic Action name, and select the tic box to copy the attributes from the Traffic
Action you just created. You will only need to modify the four attributes and select Save to save the second Traffic
Action.
• Repeat these steps for each Traffic Action, up to eight.
FIGURE 6-100 Creating a Traffic Action for an FX20 Interface Queue