User guide

Configuring Network Services Quality of Service (QoS) Network Management
509
AlliedView NMS Administration Guide
FIGURE 6-99 QoSPolicy or FX20 Egress Queues
1. As mentioned in 6.11.12.2, the Traffic Flows are pre-defined and Traffic Priority is not used, so the first step is to create
a Traffic Action (or set of Traffic Actions) that will be associated with the queues.
• Select Network Services -> QoS -> Actions -> Traffic Action - This brings up the QoS Traffic Action Form.
Note: You can also go to the Network Service data node and select QoS policies - Actions, and double click an existing Traffic Action.
• Select the New Action button, and enter the New Action Name, following the Policy naming conventions. Do not select
the Copy from ... tic box.
• At the Edit QoS Device Class List, click on Telesyn and then the Select button.