User guide

Configuring Network Services Quality of Service (QoS) Network Management
496
AlliedView NMS Administration Guide
Following are notes on using these forms:
A flow, priority, or action can be defined first and made applicable to all device types. In creating a policy, the user can
control which device types a flow, priority, or action will apply to.
The user can create the flows, priorities, and actions first, and then in creating the policy create the rules that associate
these together.
The user can create a policy first, and then use the Flow Descriptors, Priority Actions, and Traffic Actions buttons to
create new flows, priorities, and actions before defining the Rule Table.
The Copy and Paste buttons are useful when, in defining a flow, priority, or action, the user needs to copy over the
attributes to the other devices. An example would be in defining the flow CRM server; the user could define the
attributes for one device type, and then copy and paste these for the other device types.
FIGURE 6-89 Example Policy for Rapier/SwitchBlade Devices