User guide

Configuring Network Services Quality of Service (QoS) Network Management
476
AlliedView NMS Administration Guide
the specified classifier. When the condition(s) preventing the classifier’s installation is corrected (such as, HVLAN is
removed from the port) the classifier will be automatically installed and its status will be updated at the user’s CLI
session.
• FE2, GE2, FE10, FX10, ADSL24, GE3 - Supports ETHFORMATs of 802.3 and EthII. Note that each of these formats
consumes twice as many hardware resources as ETHFORMAT=802.3tagged, 802.3untagged, EthIItagged, or
EthIIuntagged.
• Interfaces/ports configured with client-side IGMP classifiers are configured to drop IGMP router packets.
• CFC4, FE2, GE2, FE10, FX10, ADSL24 - MACs for dropped or filtered packets will appear in the Forwarding Database.
They will be displayed when the SHOW SWITCH FDB command is entered.
6.11.1.3 Traffic Attributes for Rapier/Switchblade/AlliedWare Plus Devices
For detailed information on how Traffic Policies are built, go to:
http://www.alliedtelesis.com/support/default.aspx
6.11.1.4 Overview of Menu Selection
To create the attributes that make up QoS policies and then to associate them so that specific policies are created, the user
can right click on any empty area in the Physical Network node or click on the QoS Policies leaf of the Network Service Data
object and then click on Network Services of the main menu. This is shown in Figure 6-80.
FIGURE 6-80 Accessing the QoS Policies Feature