User guide

Configuring Network Services Profile Management
463
AlliedView NMS Administration Guide
FIGURE 6-71 Warning When Egress Rate Limiter is Set
To provision the DS3 SFP, select an unused Ethernet port (GE or GE8) and select Provision New Customer/Port. The only
fields that need to be filled in are the Customer ID and Port Profile, as shown in the following figure.
FIGURE 6-72 Provision Etherlike Port for DS3 SFP
After the fields are filled in and Provision is selected, the status of the port changes, with the Customer ID included and the
Status being:
• Down if the SFP has not been inserted, or the Ethernet or DS3 interface has failed.